Water management

Measure the water. Understand the trend.

The app lists 10 water-quality parameters with logging, trend charts and warning tools. The reference ranges below reproduce the information supplied with the original website and should be checked against the cultured species.

O₂min 4 mg/L

Dissolved oxygen

Carps: above 4 mg/L

Reference: 4.5–5 mg/L for shrimp and marine fish. Check at sunrise, when oxygen is often lowest. The source mentions paddle wheels at about 2 hp/ha for high biomass systems.

7.5–8.5014

pH

Many listed species: 7.5–8.5

Measure consistently and compare with the species-specific range. The source lists liming when low and gypsum for pH above 9.5.

NH₃

Ammonia (TAN)

Species-dependent

Source examples: below 0.1 mg/L for shrimp and grouper; below 0.5 mg/L for perch and pompano. Reduce feed, improve aeration or consider water exchange as appropriate.

NO₂⁻

Nitrite

Species-dependent

Source examples: below 0.05 mg/L for grouper, below 0.1 mg/L for vannamei and below 0.01 mg/L for freshwater prawn. Check oxygen and feeding; use species-specific chloride guidance.

80–120ppm

Alkalinity

Carps: 80–120 ppm

The source lists above 200 ppm for tiger shrimp. Low alkalinity management should be based on measured water chemistry and the species system.

27–32 °C

Temperature

Carps: 27–32 °C

Source examples include vannamei 30–34 °C and cobia/grouper 23–30 °C. Monitor daily and avoid sudden changes.

25–40 cm

Transparency (Secchi)

Many plankton ponds: 25–40 cm

Observe changes in water colour and transparency. Sudden changes can indicate a bloom shift or pond instability.

fresh 0brackishsea 35 ppt

Salinity

Match species to site

Source examples: carps below 5 ppt; vannamei 5–40 ppt; seabass and pompano tolerate higher salinity ranges. Acclimatise seed gradually.

Soil pH and liming reference

Values below are the lime quantities displayed in the supplied website, in kg per hectare.

Material / soil pH6.56.05.55.04.54.0
Agricultural lime2505507501,0001,2501,500
Quick lime2304606909201,1501,380
Use care with chemical calculationsThese are reference values, not a substitute for a soil and water test. Product purity, pond soil characteristics, alkalinity, culture species and local regulations affect the correct application rate. Do not apply quicklime to stocked ponds unless advised by a qualified professional.
Daily monitoring routine

Build a consistent water-quality record

A single reading provides a snapshot; a consistent series of readings helps reveal whether pond conditions are stable or changing.

Measure at consistent times

Record the date, time, pond identification, measurement method and units. Dissolved oxygen should receive particular attention around sunrise, while pH and temperature patterns can be understood better when measurements are taken consistently.

Interpret parameters together

Water-quality factors interact. Temperature and pH influence the proportion of toxic un-ionized ammonia, while salinity and species physiology affect how fish respond to nitrite. Avoid interpreting one parameter without considering the rest of the pond conditions.

Respond carefully

When a result is outside the expected range, confirm the measurement, review recent feeding and weather, inspect fish behaviour and seek technical advice where needed. Make changes gradually when appropriate and record what action was taken.

Additional water indicators

Complete the picture with nitrogen, hardness and plankton records

The platform's water log covers additional parameters that help interpret pond productivity and changing water conditions.

🧬

Nitrate

Nitrate is the final product of the biological oxidation of nitrite under aerobic conditions and is generally less acutely toxic than ammonia and nitrite. However, excessive nitrate accumulation may indicate an imbalance in nutrient loading and water exchange, particularly in intensive culture systems. Regular monitoring helps farmers understand nitrogen accumulation and maintain appropriate pond-water conditions.

🪨

Carbonate hardness (KH) and general hardness (GH)

Carbonate hardness and general hardness provide additional information about the mineral characteristics of pond water. KH is associated with the buffering system that helps stabilize pH, while GH reflects dissolved divalent minerals such as calcium and magnesium. Recording these values alongside pH and alkalinity can help users build a more complete picture of pond-water chemistry.

🌿

Plankton condition

Plankton observations help farmers understand natural food availability and changes in pond productivity. Changes in water colour, transparency and plankton abundance can indicate shifts in pond conditions. Plankton observations should be considered together with dissolved oxygen, transparency, nutrient levels and fish behaviour.

Run your pond with confidence

Water logs, species plans, disease reference and farm records in one Android app.