Culture cycle

From an empty pond to harvest.

The following sequence is the carp pond cycle described in the supplied website. Other species require their own stocking densities, seed sizes, feeds and water targets.

A well-planned culture cycle starts before stocking. Preparing the pond bottom, improving soil conditions, selecting healthy seed, managing feed and checking fish growth all contribute to a more controlled production process. The steps below present the original carp-culture sequence as a visual farm guide.

DRYING PERIOD~15 days Expose and prepare the pond bottom

Dry and prepare the pond

Begin by completely draining the pond and allowing the bottom soil to dry for approximately 15 days, as described in the carp-culture reference. Once sufficiently dry, plough the pond bottom to around 30 cm to loosen compacted soil and expose accumulated organic matter. Remove unwanted fish and other predators using appropriate pond-preparation methods. Before moving to liming, inspect the pond bottom, embankments, inlet and outlet structures, and make sure the pond is ready for the next preparation stage.

Ca

Lime and manure

Apply lime according to soil pH. The source lists cow dung at 2,000–2,500 kg/ha or poultry droppings at 500 kg/ha, 10–15 days before stocking.

1–2 °C

Stock healthy seed

Select active, uniform fingerlings from a reliable hatchery. Float transport bags and allow the temperature difference to narrow to about 1–2 °C before release.

3–5%

Feed according to biomass

The source describes 3–5% of biomass initially, reducing to 1.5–2% as fish grow. Feed twice daily and check feeding trays.

FISH LENGTH0cm 0.75 Sample · Measure · Weigh · Record

Sample and monitor

Carry out regular sampling, with the source reference describing at least 15 fish at approximately two-week intervals. Use a representative sample to record body weight and, where appropriate, length; calculate average body weight and compare the result with the previous sampling record. Update the estimated pond biomass so that feed requirements can be reviewed. Also observe fish condition and feeding response, and measure dissolved oxygen around sunrise when it is commonly at its daily minimum. Consistent records make it easier to recognize slow growth or changes in pond performance early.

8–10 months

Plan the harvest

The source describes stopping feed two days before harvest, partial harvest around 4–5 months and full harvest after 8–10 months.

Carp culture planning

Choose a stocking system that matches your pond capacity

The three systems below compare the indicative stocking and yield ranges presented in the original PondManager Pro content. Moving from extensive to intensive culture means a higher fish load and a greater need for reliable feed, water-quality monitoring and farm management.

EXTENSIVE
🐟🐟🐟

Lower stocking load

SEMI-INTENSIVE
🐟🐟🐟🐟🐟

Moderate stocking load

INTENSIVE
🐟🐟🐟🐟🐟🐟🐟🐟

Higher stocking load

01LOWER INPUT

Extensive culture

2,500–3,000 fish/ha

2–3 tonnes/haIndicative yield

Lower stocking density with a lower production target. Pond productivity and natural food availability remain important considerations.

03HIGHER INPUT

Intensive culture

15,000–20,000 fish/ha

10–15 tonnes/haIndicative yield

A high fish load that calls for strong daily management, dependable aeration, careful feeding and close water-quality surveillance.

Planning note

These are indicative ranges reproduced from the original website content, not guaranteed yields or universal stocking recommendations. Final stocking decisions should consider pond area and depth, seed size, species composition, water exchange, aeration capacity, feed quality, local climate and the farmer's management capacity. Do not increase stocking density unless the system can reliably support the resulting biomass and oxygen demand.

Integrated farming

The original site describes integration with duck, poultry, cattle, goat, pig, rabbit and rice-fish systems. Its listed examples include duck (200–300/ha), poultry (500–1,000/ha), cattle (5–6), goat (50–60) and pig (30–45). Integration needs careful manure, biosecurity and water-quality management.

Farm management notes

Connect each activity to the next

The culture cycle works best when preparation, stocking, feeding, sampling and harvest decisions are planned as one continuous process.

01 · PREPARE

Prepare before stocking

After drying and ploughing, inspect the pond bottom and structures. Lime according to soil-test information and apply organic manure only at a suitable rate and time for the pond system. The original website lists cow dung at 2,000–2,500 kg/ha or poultry droppings at 500 kg/ha, 10–15 days before stocking.

02 · ACCLIMATIZE

Reduce handling and temperature stress

Choose active, uniform seed from a reliable hatchery. During release, float transport bags and allow the temperature difference to narrow to approximately 1–2 °C before carefully releasing the fish. Follow species- and hatchery-specific handling guidance.

03 · FEED

Adjust ration as biomass changes

The original carp reference describes feeding at 3–5% of biomass initially, gradually reducing to 1.5–2% as fish grow. These figures are reference values; actual ration should reflect species, fish size, feed quality, temperature, feeding response and water conditions.

04 · SAMPLE

Use sampling to update the feed plan

Regular sampling provides an estimate of average body weight and pond biomass. The original reference describes sampling at about two-week intervals using at least 15 fish. Record each sample consistently so that growth and feed adjustments can be reviewed over time.

05 · HARVEST

Plan harvest around fish and market size

Harvest timing depends on species, growth, survival, market demand and farm conditions. The original carp reference mentions partial harvest at around 4–5 months and full harvest after 8–10 months. These periods should be treated as illustrative rather than guaranteed production schedules.

Run your pond with confidence

Water logs, species plans, disease reference and farm records in one Android app.